Botanical and Nutraceutical Extraction, Solvent Recovery and Spray Drying Equipment for Malaysia
Mechotech engineers and builds botanical and nutraceutical extraction plants, solvent recovery and concentration equipment and spray dryers at its Hyderabad, India works. Share your raw material, target extract and capacity and we will reply with a technical proposal for your Malaysia project.
- Manufactured at our Hyderabad, India works
- SS 316L product-contact construction
- Closed-loop solvent recovery on extraction plants
- Delivery and installation scope agreed per project
Three Equipment Areas for Malaysia Projects
Extraction, solvent recovery and concentration, and powder drying. Each section states what is listed and what needs review.
Botanical & nutraceutical extraction
Extraction plants for botanical and nutraceutical ingredients.
See plantsSolvent recovery & concentration
Closed-loop solvent recovery and evaporators for concentrating extracts.
See plantsSpray dryers & powder plants
Spray dryers that turn extract concentrates into powder.
See plants
Botanical and Nutraceutical Extraction Plants for Malaysia
Nutraceutical extracts depend on repeatable standardisation, so the plant is engineered around the botanical and the marker you target: milling, extraction in closed SS 316L extractors, filtration, concentration with solvent recovery, standardisation and drying. Mechotech lists a nutraceutical and botanical extraction range alongside its herbal extraction plants.
Validate before you scale: our pilot plants and the Process Development Centre support laboratory and pilot trials and mass balance before commercial equipment is sized.
- Nutraceutical and herbal extraction plants
- Standardisation and drying of the finished extract
- Pilot validation before commercial sizing
Scope note: Final configuration depends on your exact raw material and target extract. Our engineers confirm the process route before proposing a plant.
Herbal Extraction Plants
Herbal and botanical extraction plants engineered around your feedstock.
View plant
Nutraceutical & Botanical Extraction Plants
The nutraceutical and botanical extraction plant range.
View plant
Pilot Plant for Extraction, Evaporation & Drying
Pilot-scale systems to validate your process before scale-up.
View plantSolvent Recovery and Concentration Equipment for Malaysia
After extraction, the solvent must be separated and recovered, and the extract concentrated. Mechotech's solvent extraction plants integrate closed-loop solvent recovery, and the range includes a solvent recovery distillation plant and falling-film, multiple-effect and vacuum evaporators for concentration.
Recovery performance is established during process development and pilot validation on your solvent system, not assumed. Share your solvent, extract and throughput for a proposal.
- Closed jacketed SS 316L extractors with integrated solvent recovery
- Solvent recovery distillation plant listed
- Falling-film, multiple-effect and vacuum evaporators listed
Spray Dryers and Powder Plants for Malaysia
A spray dryer converts botanical extract concentrates, and other liquid feeds, into dry powder in one continuous pass. Mechotech builds it in SS 316L with the atomizer matched to the feed, with cyclone and bag-filter powder recovery and PLC-based control, from pilot scale upward.
Whether your feed suits the dryer, and any carrier or drying aid, is confirmed on review and a trial. Fruit and vegetable powders follow the same logic; see the powder plant page.
- Extract concentrates to powder in one pass
- Atomizer options set to your feed
- Fruit and vegetable powder routes assessed
Scope note: Drying equipment is selected to your feed and target form; fit is confirmed on review and, where needed, a pilot trial.
Have a raw material and a target capacity? Get a technical proposal for Malaysia.
From Engineering Review to a Running Plant
Malaysia projects are handled directly by the manufacturer. Equipment is engineered and built at our Hyderabad, India works, and how delivery, installation and commissioning work for your site is agreed project by project in the technical proposal.
- 1
Engineering
Process route, equipment duties and utility needs worked out around your raw material and your site in Malaysia.
Process engineering - 2
Manufacturing
Built at our Hyderabad, India works with SS 316L process-contact parts and factory testing, with export-ready documentation.
Turnkey plant solutions - 3
Installation
Mechanical erection, piping and utility integration and instrumentation checks. How this is delivered for Malaysia is agreed in the proposal.
Installation & commissioning - 4
Commissioning
Trial runs, parameter stabilisation and handover documents: drawings, P&IDs and O&M manuals.
Validation & documentation
Technical Reading Behind These Equipment Areas
Process write-ups and guides for the equipment above, plus how a raw material is validated before you commit to a plant.
Process write-ups and guides
Validate before you scale
Our Botanical Process Development Centre, with Sureka Life Sciences, takes a raw material from lab feasibility through pilot trial and scale-up to plant engineering.
Process Development CentreEngineered in India for Malaysia Projects
Malaysia enquiries are handled by our engineering team at our global headquarters in Hyderabad, India, where the equipment is also manufactured.
Installation, commissioning and project-support scope for your site is defined project by project in the technical proposal.
You deal with the manufacturer
Engineering and fabrication happen at our Hyderabad, India works, so you work with the company that designs and builds the equipment.
Scope stated plainly
Each section says what Mechotech lists and what is scoped on enquiry, so you know where a proposal is firm and where engineering review comes first.
Validate before you scale
Raw-material feasibility and pilot trials are available through our Botanical Process Development Centre with Sureka Life Sciences.
Engineering heritage since 1997
Semi- and fully-automatic extraction, distillation, evaporation and drying equipment, built in SS 316L.
Questions About Plants for Malaysia
What do I need to specify for a nutraceutical extraction plant?
The botanical and plant part, the extract and marker compound you target with its specification, the daily capacity, the solvent you prefer and the utilities at site. A pilot trial is recommended before sizing a commercial plant.
How much solvent can be recovered?
Recovery performance depends on your solvent and process and is established during process development and pilot validation. We do not quote a recovery percentage in advance.
Can extract concentrates be spray dried?
Yes, a spray dryer converts botanical and herbal extract concentrates into dry powder in one pass, with atomizer options set to your feed. Carrier and settings are confirmed on trial.
How are plants supplied to Malaysia?
Plants are built at our Hyderabad, India works and supplied with export documentation. Shipping, installation and commissioning scope for your site is agreed in the proposal.
Ready to Scope Your Plant in Malaysia?
Send your raw material and target capacity. Our engineers will reply with a technical proposal.
Tell Us About Your Malaysia Project
Only name, email, phone and industry are required. The more you share about raw material and capacity, the more precise our proposal. We respond within 24 hours.