Needles & Twigs Distillation Plants

Taiwan Hinoki Needles & Twigs Oil

Mechotech designs and manufactures turnkey needles & twigs distillation plants for Taiwan Hinoki. The product tree lists Taiwan Hinoki under Needles & Twigs Distillation Plants as well as under Wood / Bark Distillation Plants. No Mechotech page text, legacy page or catalogue entry describes a needle and twig route for this plant: Mechotech’s legacy page describes the bark route and the Sureka Life Sciences (SLS) catalogue entry sits in its Wood & Bark category, both covered on the separate Taiwan Hinoki page. This page therefore records the needles and twigs entry as the product tree lists it, without adding a composition or a marker of its own, and the feed form is confirmed with the client before the plant is configured.

Mechotech’s Taiwan Hinoki plant is configured around the raw material and the target oil. It is built in SS 316L with integrated condensers and oil–water separation, PLC-based automation and full documentation, and is delivered as a commissioned turnkey system. The distillation mode and operating parameters are established during process development and pilot validation.

Technical Specifications

Product	Taiwan Hinoki Essential Oil Distillation Plant
Raw Material	Taiwan hinoki needles and twigs (Chamaecyparis species, to be confirmed)
Botanical Name	Chamaecyparis formosensis (per Mechotech’s legacy Taiwan Hinoki page, which covers bark); the Sureka Life Sciences catalogue lists Chamaecyparis Taiwanensis for its bark and wood entry
Plant Part / Feed Form	Needles and twigs, as the Needles & Twigs Distillation Plants group lists them; no source describes this entry’s feed, so the exact part and form are confirmed with the client
Marker Compound	Not stated for the needle and twig oil; the Sureka Life Sciences catalogue lists hinokitiol for its Taiwan Hinoki entry (bark and wood), and the marker for this oil is confirmed with the client
Product Category	Needles & Twigs Distillation Plants
Extraction Method	Steam, hydro, vacuum or pressure distillation — selected for the volatility and heat-sensitivity of the target oil
Product-contact Material	SS 316L
Condensation	Multi-tube condenser with chilled-water circulation
Oil–Water Separation	Stainless-steel Florentine flask
Finishing	Polish filtration; drying over anhydrous sodium sulphate or by vacuum
Automation	PLC-based
Plant Capacity	Configured to requirement
Utility Requirements	Steam, chilled/cooling water, compressed air and power (project-specific)
Compliance	GMP hygienic design; full documentation for qualification
Final Product Form	Taiwan Hinoki essential oil; aromatic hydrosol as co-product

Plant Capacities

Plant Scale	Raw Material Throughput	Typical Use
Pilot	Configured to your feedstock and trial plan	Product development, parameter validation
Semi-Commercial	Configured between pilot and commercial scale	Scale-up trials, contract manufacturing
Commercial	Configured to raw-material supply and confirmed buyer volume	Commercial production

Capacity is configured to raw-material supply, confirmed buyer volume and investment timeline; a pilot plant is recommended to validate parameters before scaling.

Manufacturing Process

Raw Material Preparation

Taiwan hinoki needles and twigs are cleaned of debris and cut or chopped to a manageable length, as agreed with the client, so that the charge packs evenly in the still and steam can reach the foliage; the cut length and the proportion of needle to twig are set during process development.

Charging & Distillation

The prepared Taiwan Hinoki charge is loaded into the SS 316L still and distilled by steam, hydro, vacuum or pressure distillation, selected during process development for the volatility and heat-sensitivity of the target oil.

Condensation

Vapours pass through a multi-tube condenser with chilled-water circulation, condensing the oil and hydrosol.

Oil–Water Separation

Condensate is separated in a stainless-steel Florentine flask; the oil is collected and the hydrosol is drawn off and can be recovered as a co-product.

Polishing & Drying

The crude oil is polish-filtered and dried over anhydrous sodium sulphate or by vacuum to remove residual moisture.

Quality Control

Each batch is sampled for GC-MS profile and physical parameters — specific gravity, refractive index, optical rotation — against the client’s specification.

Major Plant Equipment

Needle and twig cleaning and chopping system
Perforated basket or false-bottom charge support
SS 316L distillation still / extractor
Multi-tube condenser with chilled-water circulation
Stainless-steel Florentine flask (oil–water separator)
Polish filtration system
Drying unit (anhydrous sodium sulphate or vacuum)
CIP system
PLC-based automation and instrumentation

Plant Output

Taiwan Hinoki essential oilAromatic hydrosol (co-product)

Applications

Aromatherapy applications
Skin-care and hair-care products (catalogue use areas for the bark and wood oil)
Bath products (catalogue use area for the bark and wood oil)

Key Features

SS 316L Construction
Product-contact surfaces are SS 316L for corrosion resistance and product purity, with CIP capability between batches.
Efficient Condensation
Multi-tube condensers with chilled-water circulation condense the volatile oil and hydrosol and limit loss of volatile top-notes.
Configurable Distillation Mode
The still is configured for steam, hydro, vacuum or pressure distillation, selected during process development for the needle and twig charge and the target oil.
Hydrosol Recovery
Integrated oil–water separation allows the aromatic hydrosol to be drawn off and recovered as a co-product.
Scalable Capacity
Plants are configured to requirement from pilot scale upward, with modular expansion.

Frequently Asked Questions

Does Mechotech supply the complete machinery for Taiwan Hinoki?

Yes. Mechotech supplies the complete turnkey plant for Taiwan Hinoki — engineered, fabricated at our Hyderabad facility, installed and commissioned as a single integrated system. Final process parameters are established during process development and pilot validation.

What specification can the Taiwan Hinoki plant achieve?

The plant is configured to the client’s target specification for Taiwan Hinoki; the specification achieved is established during process development and pilot validation, and batch-release testing with certificate-of-analysis documentation is defined with the client.

What production capacities are available for the Taiwan Hinoki plant?

Capacity for the Taiwan Hinoki plant is configured to raw-material supply, confirmed buyer volume and investment timeline, starting at pilot scale; a pilot plant is recommended to validate parameters before scaling.

Which application areas does the catalogue list for the Taiwan Hinoki plant?

For the bark and wood oil of the same plant, the Sureka Life Sciences catalogue lists aromatherapy, topical skincare, hair and scalp care, household cleaning and baths among its application areas; these are catalogue use areas, not performance claims by Mechotech.

Which part of Taiwan Hinoki is processed on this page?

The product tree lists Taiwan Hinoki under Needles & Twigs Distillation Plants, so this page covers needles and twigs. No Mechotech page text, legacy page or catalogue entry describes the needle and twig route, so the exact part and form are confirmed with the client before the plant is configured. The bark route is on the Taiwan Hinoki Bark & Wood Oil page.

How is Taiwan Hinoki oil produced in the plant?

The prepared Taiwan Hinoki charge is loaded into an SS 316L still and distilled by steam, hydro, vacuum or pressure distillation, selected for the volatility and heat-sensitivity of the target oil. Vapours are condensed in a multi-tube condenser, the oil and hydrosol are separated in a Florentine flask, and the crude oil is polish-filtered and dried before GC-MS and physical-parameter testing.

Why does this page state no composition or marker?

The only Mechotech and Sureka Life Sciences descriptions of Taiwan Hinoki oil cover the bark and wood, and they name hinokitiol as the catalogue marker for that oil. They do not say whether needle and twig oil has the same composition, so none is claimed here; the oil specification is agreed with the client during process development.

How does this page differ from the other Taiwan Hinoki and Hinoki pages?

Taiwan Hinoki Bark & Wood Oil is the bark and wood entry, and the page has the same title because the product tree lists the plant in both groups. Hinoki Bark & Wood Oil and Hinoki Needles & Twigs Oil are the two Hinoki entries, which Mechotech’s legacy page and the Sureka Life Sciences catalogue name as Chamaecyparis obtusa. The species and the part differ between entries, so confirm which one is wanted before choosing a page.

Which neighbouring plants does the product tree list with Taiwan Hinoki (needles and twigs)?

Mechotech’s product tree lists Taiwan Hinoki last in the Needles & Twigs group, after Silver Fir (Needles), Siberian Fir and Pinyon Pine. The hub is Needles & Twigs Distillation Plants.

Ready to discuss your project?

Get a free quote and technical consultation from our engineering team.

Get A Free Quote

Taiwan Hinoki Needles & Twigs Oil