Peru Balsam
Peru Balsam
Mechotech designs and manufactures turnkey gums & resins distillation plants for Peru Balsam. Mechotech’s legacy page text names Myroxylon balsamum resin and describes steam or vacuum distillation to a peru balsam oil with a rich, sweet, vanilla-like aroma used in perfumery, pharmaceuticals, cosmetics and aromatherapy. The Sureka Life Sciences (SLS) catalogue lists Peru Balsam Resin Distillation with Myroxylon balsamum as the botanical source. The catalogue figure for the marker is cinnamein 50–65%, a listing figure and not a delivered specification. The exact resin form is confirmed with the client before the plant is configured.
Mechotech’s Peru Balsam plant is configured around the raw material and the target oil. It is built in SS 316L with integrated condensers and oil–water separation, PLC-based automation and full documentation, and is delivered as a commissioned turnkey system. The distillation mode and operating parameters are established during process development and pilot validation.
Technical Specifications
| Product | Peru Balsam Essential Oil Distillation Plant |
|---|---|
| Raw Material | Peru balsam resin |
| Botanical Name | Myroxylon balsamum (per the Sureka Life Sciences catalogue entry for Peru Balsam Resin Distillation and Mechotech’s legacy page text) |
| Plant Part / Feed Form | Resin (balsam), as listed under Gums & Resins Distillation Plants (exact form confirmed with the client) |
| Marker Compound | Cinnamein, catalogue figure 50–65% (per the Sureka Life Sciences offering grade; the same entry lists cinnamaldehyde in its active-compound field, so the marker name is confirmed with the client) |
| Product Category | Gums & Resins Distillation Plants |
| Extraction Method | Steam, hydro, vacuum or pressure distillation — selected for the volatility and heat-sensitivity of the target oil |
| Product-contact Material | SS 316L |
| Condensation | Multi-tube condenser with chilled-water circulation |
| Oil–Water Separation | Stainless-steel Florentine flask |
| Finishing | Polish filtration; drying over anhydrous sodium sulphate or by vacuum |
| Automation | PLC-based |
| Plant Capacity | Configured to requirement |
| Utility Requirements | Steam, chilled/cooling water, compressed air and power (project-specific) |
| Compliance | GMP hygienic design; full documentation for qualification |
| Final Product Form | Peru Balsam essential oil; aromatic hydrosol as co-product |
Plant Capacities
| Plant Scale | Raw Material Throughput | Typical Use |
|---|---|---|
| Pilot | Configured to your feedstock and trial plan | Product development, parameter validation |
| Semi-Commercial | Configured between pilot and commercial scale | Scale-up trials, contract manufacturing |
| Commercial | Configured to raw-material supply and confirmed buyer volume | Commercial production |
Capacity is configured to raw-material supply, confirmed buyer volume and investment timeline; a pilot plant is recommended to validate parameters before scaling.
Manufacturing Process
Raw Material Preparation
Peru balsam resin is conditioned and, where required, warmed or diluted into a chargeable form so that it can be loaded into the still; the handling of the viscous balsam and the feed form are set during process development.
Charging & Distillation
The prepared Peru Balsam charge is loaded into the SS 316L still and distilled by steam, hydro, vacuum or pressure distillation, selected during process development for the volatility and heat-sensitivity of the target oil.
Condensation
Vapours pass through a multi-tube condenser with chilled-water circulation, condensing the oil and hydrosol.
Oil–Water Separation
Condensate is separated in a stainless-steel Florentine flask; the oil is collected and the hydrosol is drawn off and can be recovered as a co-product.
Polishing & Drying
The crude oil is polish-filtered and dried over anhydrous sodium sulphate or by vacuum to remove residual moisture.
Quality Control
Each batch is sampled for GC-MS profile and physical parameters — specific gravity, refractive index, optical rotation — against the client’s specification.
Major Plant Equipment
- Resin receiving and conditioning system
- Perforated basket or false-bottom charge support
- SS 316L distillation still / extractor
- Multi-tube condenser with chilled-water circulation
- Stainless-steel Florentine flask (oil–water separator)
- Polish filtration system
- Drying unit (anhydrous sodium sulphate or vacuum)
- CIP system
- PLC-based automation and instrumentation
Plant Output
Applications
- Perfumery and cosmetics
- Skin-care products
- Aromatherapy applications
- Massage products
Key Features
SS 316L Construction
Product-contact surfaces are SS 316L for corrosion resistance and product purity, with CIP capability between batches.
Efficient Condensation
Multi-tube condensers with chilled-water circulation condense the volatile oil and hydrosol and limit loss of volatile top-notes.
Steam or Vacuum Distillation
Mechotech’s legacy page text describes steam or vacuum distillation for peru balsam; the mode and parameters are selected during process development for the viscous resin and the target oil.
Hydrosol Recovery
Integrated oil–water separation allows the aromatic hydrosol to be drawn off and recovered as a co-product.
Scalable Capacity
Plants are configured to requirement from pilot scale upward, with modular expansion.
Frequently Asked Questions
Does Mechotech supply the complete machinery for Peru Balsam?
What specification can the Peru Balsam plant achieve?
What production capacities are available for the Peru Balsam plant?
Which end uses are listed for the Peru Balsam plant?
Which part of Peru Balsam is processed in the distillation plant?
How is Peru Balsam oil produced in the plant?
What is the botanical source and marker compound of Peru Balsam on this page?
Is Peru Balsam the same as Balsam Fir or Gurjum balsam?
Which neighbouring plants does the product tree list with Peru Balsam?
Ready to discuss your project?
Get a free quote and technical consultation from our engineering team.