Mechotech is a manufacturer and supplier of extraction equipment in Hyderabad, India. We engineer and build herbal, botanical, solvent and spice oleoresin extraction plants and essential oil distillation units for ginger, turmeric, moringa leaf, hibiscus and aromatic oil projects. Request a technical proposal for your Ghana plant.
Hibiscus is extracted rather than simply dried: milled flower is extracted with alcohol or an aqueous solvent, filtered, concentrated with solvent recovery, standardised and then dried as an extract. Mechotech lists hibiscus flower, hibiscus liquid and dark red hibiscus routes, alongside herbal extraction plants for medicinal and traditional herbs.
Send your plant material and the extract you want and we will confirm the route, the solvent and whether the finished extract is a concentrate or a powder.
Scope note: Final configuration depends on your exact raw material and target extract. Raw-flower drying, sorting and powder-milling lines are not listed in our catalog.
Hibiscus extract routes, process steps and the limits of what is listed.
View plant
Herbal and botanical extraction plants, engineered around each feedstock.
View plant
Moringa leaf extraction into a glycoside-standardised extract.
View plantA spray dryer converts a liquid feed, such as a juice or an extract concentrate, into powder in one pass. Where the product is pieces or wet solids rather than a liquid, other listed dryers (vacuum tray, fluidised bed, paddle, freeze) are assessed instead.
A complete raw-produce dehydration line is not a listed standard product. We scope it per project from your fruit or vegetable, moisture target and capacity, and we recommend a drying trial before sizing.
Scope note: We list spray, vacuum and other dryers, mainly for extracts, concentrates and process materials. A complete raw-produce dehydration line is scoped per project after engineering review.
Complete feed mills (grinding, mixing, pelleting, extrusion, cooling and bagging) are not listed in the Mechotech catalog, so we do not offer a standard feed plant. This section is an enquiry route for buyers who want an engineering opinion on whether any part of their project falls within our process-equipment range.
Where a feed ingredient needs drying, evaporation or filtration, those parts of our range can be assessed. Send the species, product form, raw materials and capacity and we will say plainly what we can and cannot scope.
Scope note: Poultry, cattle and aqua feed plants are not listed in our catalog. Our engineers confirm whether any part of your project falls within our equipment range before any commitment.
Herbal, botanical and medicinal-plant extraction, solvent extraction, spice oleoresin, essential oil and steam distillation, and industrial extraction equipment. Start from the product you want to make: each plant page explains the process route and the ranges that can be configured.
A complete machinery train engineered around each feedstock and target specification, with closed-loop solvent recovery.
View plantHerbal and botanical extraction for medicinal and traditional herbs: GMP-compliant SS 316L herbal extraction plants with closed-loop solvent recovery.
View plant
Turnkey oleoresin lines for culinary and industrial spices, including ginger and turmeric.
View plant
Essential oil distillation units: steam, hydro, vacuum and pressure, plus cold-press extractors for oil-rich feedstock.
View plant
Steam distillation units for flowers, leaves, herbs, grasses and spices: volatile oil is recovered with minimal thermal degradation, with oil-water separation and hydrosol recovery.
View plant
Industrial extraction equipment from our extraction equipment range, from batch and continuous extractors to supercritical CO₂, engineered around your application.
View plantChoose your raw material to see the plant and the process route. Ginger and turmeric come first, with a process write-up for each.
Pick the route that matches your product: an oleoresin plant, a gingerol-standardised extract from 2.5% up to 60% total gingerols by HPLC, or ginger oil from a distillation plant or a CO₂ extraction plant. Capacity is configured to requirement, from pilot scale upward.
Process route: Cleaning and size reduction, solvent extraction, filtration, vacuum concentration, solvent recovery, aroma recovery, standardisation, QC and packing.
Curcumin: solvent extraction followed by purification, crystallisation and standardisation, targeting up to 95% curcuminoids by HPLC. Turmeric oleoresin, turmeric oil by distillation and turmeric oil by CO₂ extraction are separate plant routes. A pilot plant is recommended to validate process parameters and the market before scaling.
Process route: Raw material preparation, solvent extraction, clarification, concentration and solvent recovery, purification, crystallisation and centrifugation, standardisation, drying.
A hydro-alcoholic extraction line for fresh or dried leaf, giving a glycoside-standardised extract from 5% up to 40% glycosides by gravimetry.
Process route: Raw material preparation, extraction, filtration and membrane clarification, concentration and solvent recovery, standardisation, drying.
A turnkey leaf-oil distillation plant that turns citronella into an essential oil configured to your target specification.
Distillation is interrupted at defined intervals to separate each batch into Extra, First, Second and Third grade fractions.
Have a raw material and a target capacity? Get a technical proposal for Ghana.
Our catalog lists hibiscus extraction equipment as complete hibiscus flower extraction plants for pharmaceutical, nutraceutical, food and beverage, cosmetic and ayurvedic uses. Hibiscus is milled, extracted, filtered, concentrated with solvent recovery, standardised and dried to an extract.
Milled hibiscus flower is extracted with food-grade alcohol or aqueous solvent in closed jacketed SS 316L extractors, clarified through a filter press and polish filters, and concentrated in a falling-film or vacuum evaporator with solvent recovery.
Process route: Raw material preparation, extraction, filtration, concentration and solvent recovery, standardisation, spray or vacuum drying of the extract, QC.
A herbal extraction plant for Hibiscus Liquid (Hibiscus rosa-sinensis), standardised to HCA, with the same extraction, filtration, concentration and drying route and assay at batch release.
Process route: Raw material preparation, extraction, filtration, concentration and solvent recovery, standardisation to HCA, spray or vacuum drying, QC.
A natural-colour extraction plant for dark red hibiscus and day lily flowers, built on the same milling, solvent extraction, filtration and concentration route, for an extract configured to your target specification.
Scope: these plants make a hibiscus extract. The drying step dries the finished extract. Raw-flower drying, sorting and powder-milling lines are not listed in our catalog.
Equipment to complete or upgrade an extraction line, solvent-free CO₂ extraction for premium extracts, and spray drying of extract concentrates to powder.
Residue-free extraction of essential oils and spice oleoresins; the product page lists ginger and turmeric among the applications.
View plant
A solvent-free route distinct from steam distillation and solvent oleoresin extraction, with closed-loop CO₂ recovery.
View plant
Distillation equipment, including steam, vacuum and short-path distillation units, for refining and recovery.
View plant
Evaporators, including multiple-effect units, for concentration and solvent recovery.
View plant
Turns botanical and herbal extract concentrates into dry powder in one continuous pass, with atomizer options set to your feed.
View plant
Filtration and centrifuge equipment to complete the extraction line.
View plantGhana projects are handled directly by the manufacturer. Plants are engineered and built at our Hyderabad, India works, and how delivery, installation and commissioning work for your Ghana site is agreed project by project in the technical proposal.
Flow diagrams, equipment duties, utility needs and plant layout prepared around your raw material and your site in Ghana.
Process engineeringBuilt at our Hyderabad, India works with SS 316L process-contact parts and factory acceptance testing, with export-ready documentation.
Turnkey plant solutionsMechanical erection, piping and utility integration and instrumentation checks. How this is delivered for Ghana is agreed in the proposal.
Installation & commissioningTrial runs, parameter stabilisation and handover documents: technical dossier, P&IDs and O&M manuals.
Validation & documentationProcess write-ups for the extraction plants most relevant to Ghana projects, plus how a raw material is validated before you commit to a plant.
Our Botanical Process Development Centre, with Sureka Life Sciences, takes a raw material from lab feasibility through pilot trial and scale-up to plant engineering.
Process Development CentreGhana projects are engineered and manufactured at our headquarters in Hyderabad, India. Mechotech also has offices in the USA, UAE, UK, Singapore, Germany, Nigeria and Ghana.
Our Ghana Office is at No. 421 University Road, Sowutuom, Accra, Ghana. Installation, commissioning and project-support scope for your site is defined project by project in the technical proposal.
Engineering and fabrication happen at our Hyderabad, India works, so you work with the company that designs and builds the plant.
Plants for projects abroad ship with export-ready documentation, drawings, P&IDs and O&M manuals.
Raw-material feasibility and pilot trials are available through our Botanical Process Development Centre with Sureka Life Sciences.
SS 316L contact parts and closed-loop solvent recovery on the extraction plants listed on this page.
Tell us your raw material, the product you want to make and its specification, the daily capacity you need, the utilities available at your site and where in Ghana the plant will be built. Only name, email, phone and industry are mandatory on the form, and the engineering team refines the rest with you.
Yes. Mechotech designs and manufactures turnkey extraction and distillation plants at its Hyderabad, India works and supplies them to customers abroad. For Ghana, the proposal sets out the process route, equipment and the delivery scope for your site.
Yes. Our herbal extraction plants are built for medicinal and traditional herbs and botanical raw materials: milling, solvent extraction, filtration, concentration with closed-loop solvent recovery, standardisation and drying of the extract, in GMP-compliant SS 316L. Tell us your plant material and target extract and we confirm the route.
Yes. Our essential oil extraction machines are steam, hydro, vacuum and pressure distillation units, plus cold-press extractors for oil-rich feedstock. Steam distillation recovers the volatile oil with oil-water separation and hydrosol recovery. Citronella and ylang ylang plants are listed as examples; send your raw material for other oils.
The oleoresin plant (cleaning and milling, solvent extraction, concentration, solvent and aroma recovery, standardisation) produces ginger oleoresin. The ginger extract plant produces a gingerol-standardised extract from 2.5% up to 60% total gingerols by HPLC. Ginger oil is made in a distillation plant or a CO₂ extraction plant. Tell us your target product and we confirm the route.
Yes. The curcumin extraction plant processes turmeric rhizome into a curcuminoid extract standardised up to 95% by HPLC. Turmeric oleoresin has its own spice oleoresin plant route, and turmeric oil plants are listed for distillation and CO₂ extraction. A pilot plant is recommended to validate process parameters before scaling.
For hibiscus extraction, yes. Our hibiscus flower extraction plants mill, extract (alcohol or aqueous solvent), filter, concentrate with solvent recovery, standardise and then spray- or vacuum-dry the extract. The catalog lists Hibiscus Flowers, Hibiscus Liquid (Hibiscus rosa-sinensis, HCA) and dark red hibiscus. Raw-flower drying and powder-milling lines are not listed; send your hibiscus variety and target extract and we confirm the route.
Mechotech also supplies a spray dryer, which converts botanical and herbal extract concentrates into dry powder in one continuous pass. Vacuum and freeze-drying options are listed on the drying equipment page.
This page covers ginger (oleoresin, gingerol extract and oil), turmeric and curcumin, moringa leaf, hibiscus flower extraction, and citronella and ylang ylang essential oils, plus general herbal, botanical and solvent extraction. For other materials, send the details and we confirm process suitability before quoting.
Our scope is extraction, distillation and the supporting evaporation and drying equipment. Complete agro or food processing lines, such as fruit juice, shea, palm, cocoa, cashew or cassava processing, are not listed in our catalog. For an ingredient-extraction project, send the raw material, target product and capacity and we confirm process suitability before quoting.
Plants are engineered and manufactured at our Hyderabad, India works, factory-tested before dispatch and supplied with export-ready documentation. How shipping, installation and commissioning are handled for your Ghana site is set out in the technical proposal.
Yes. Our Ghana Office is at No. 421 University Road, Sowutuom, Accra, Ghana. Plants are engineered and manufactured at our Hyderabad, India works, and Ghana enquiries are handled by our engineering team on +91 77992 68899 or info@mechotechglobal.com. Installation, commissioning and project-support scope for your site is set out in the technical proposal.
Send your raw material and target capacity. Our engineers will come back with a technical proposal.
Only name, email, phone and industry are required. The more you share about raw material and capacity, the more precise our proposal. We respond within 24 hours.
