Sugandha Kokila
Sugandha Kokila
Mechotech designs and manufactures turnkey seeds & berries distillation plants for Sugandha Kokila. The product tree lists the entry as Sugandha Kokila (Dried Berries), and Mechotech’s legacy page describes distillation of essential oil from the dried berries of Cinnamomum glaucescens. The Sureka Life Sciences (SLS) catalogue lists Sugandha Kokila Distillation with Cinnamomum glaucescens as the botanical source and 1,8-cineole as the offering grade. The exact berry form, whole or crushed, is confirmed with the client before the plant is configured.
Mechotech’s Sugandha Kokila plant is configured around the raw material and the target oil. It is built in SS 316L with integrated condensers and oil–water separation, PLC-based automation and full documentation, and is delivered as a commissioned turnkey system. The distillation mode and operating parameters are established during process development and pilot validation.
Technical Specifications
| Product | Sugandha Kokila Essential Oil Distillation Plant |
|---|---|
| Raw Material | Sugandha Kokila dried berries (Cinnamomum glaucescens) |
| Botanical Name | Cinnamomum glaucescens (per Mechotech’s legacy page and the Sureka Life Sciences catalogue entry for Sugandha Kokila Distillation) |
| Plant Part / Feed Form | Dried berries, as the product tree and the legacy page list them (the exact form, whole or crushed, is confirmed with the client) |
| Marker Compound | 1,8-Cineole (per the Sureka Life Sciences catalogue entry; see the FAQ on the catalogue CAS number) |
| Product Category | Seeds & Berries Distillation Plants |
| Extraction Method | Steam, hydro, vacuum or pressure distillation — selected for the volatility and heat-sensitivity of the target oil |
| Product-contact Material | SS 316L |
| Condensation | Multi-tube condenser with chilled-water circulation |
| Oil–Water Separation | Stainless-steel Florentine flask |
| Finishing | Polish filtration; drying over anhydrous sodium sulphate or by vacuum |
| Automation | PLC-based |
| Plant Capacity | Configured to requirement |
| Utility Requirements | Steam, chilled/cooling water, compressed air and power (project-specific) |
| Compliance | GMP hygienic design; full documentation for qualification |
| Final Product Form | Sugandha Kokila essential oil; aromatic hydrosol as co-product |
Plant Capacities
| Plant Scale | Raw Material Throughput | Typical Use |
|---|---|---|
| Pilot | Configured to your feedstock and trial plan | Product development, parameter validation |
| Semi-Commercial | Configured between pilot and commercial scale | Scale-up trials, contract manufacturing |
| Commercial | Configured to raw-material supply and confirmed buyer volume | Commercial production |
Capacity is configured to raw-material supply, confirmed buyer volume and investment timeline; a pilot plant is recommended to validate parameters before scaling.
Manufacturing Process
Raw Material Preparation
Dried Sugandha Kokila berries are cleaned and, where required, coarsely crushed so that steam can reach the oil-bearing tissue and the charge packs evenly in the still; the degree of crushing is set during process development.
Charging & Distillation
The prepared Sugandha Kokila charge is loaded into the SS 316L still and distilled by steam, hydro, vacuum or pressure distillation, selected during process development for the volatility and heat-sensitivity of the target oil.
Condensation
Vapours pass through a multi-tube condenser with chilled-water circulation, condensing the oil and hydrosol.
Oil–Water Separation
Condensate is separated in a stainless-steel Florentine flask; the oil is collected and the hydrosol is drawn off and can be recovered as a co-product.
Polishing & Drying
The crude oil is polish-filtered and dried over anhydrous sodium sulphate or by vacuum to remove residual moisture.
Quality Control
Each batch is sampled for GC-MS profile and physical parameters — specific gravity, refractive index, optical rotation — against the client’s specification.
Major Plant Equipment
- Berry cleaning and crushing system
- Perforated basket or false-bottom charge support
- SS 316L distillation still / extractor
- Multi-tube condenser with chilled-water circulation
- Stainless-steel Florentine flask (oil–water separator)
- Polish filtration system
- Drying unit (anhydrous sodium sulphate or vacuum)
- CIP system
- PLC-based automation and instrumentation
Plant Output
Applications
- Aromatherapy applications
- Perfumery compositions
- Cosmetic products
- Pharmaceutical uses (catalogue use area)
Key Features
SS 316L Construction
Product-contact surfaces are SS 316L for corrosion resistance and product purity, with CIP capability between batches.
Efficient Condensation
Multi-tube condensers with chilled-water circulation condense the volatile oil and hydrosol and limit loss of volatile top-notes.
Configurable Distillation Mode
The still is configured for steam, hydro, vacuum or pressure distillation, selected during process development for the seed or berry charge and the target oil.
Hydrosol Recovery
Integrated oil–water separation allows the aromatic hydrosol to be drawn off and recovered as a co-product.
Scalable Capacity
Plants are configured to requirement from pilot scale upward, with modular expansion.
Frequently Asked Questions
Does Mechotech supply the complete machinery for Sugandha Kokila?
What specification can the Sugandha Kokila plant achieve?
What production capacities are available for the Sugandha Kokila plant?
Which application areas does the catalogue list for the Sugandha Kokila plant?
Which part of Sugandha Kokila is processed in the distillation plant?
How is Sugandha Kokila oil produced in the plant?
What is the botanical source and marker compound of Sugandha Kokila on this page?
Why is the catalogue CAS number not used here?
How does Sugandha Kokila differ from the other Sugandha pages?
Which neighbouring plants does the product tree list with Sugandha Kokila?
Ready to discuss your project?
Get a free quote and technical consultation from our engineering team.