Coriander — Seed
Coriander — Seed
Mechotech designs and manufactures turnkey spices oils distillation plants for Coriander (Coriandrum sativum). We supply the complete machinery to process Coriander (seed) into an essential oil configured to the client’s target specification. The catalogue describes coriander seed oil as dominated by linalool (60–80%), a sweet, floral, slightly spicy alcohol used widely as an aroma chemical.
Mechotech’s Coriander distillation plant is configured around the raw material and the target oil. It is built in SS 316L with integrated condensers and oil–water separation, PLC-based automation and full documentation, and is delivered as a commissioned turnkey system. The distillation mode is selected during process development.
Technical Specifications
| Product | Coriander Distillation Plant |
|---|---|
| Botanical Name | Coriandrum sativum |
| Raw Material | Coriander |
| Plant Part | Seed |
| Product Category | Spices Oils Distillation Plants |
| Key Constituents (catalogue) | Linalool 60–80%, camphor 3–8%, geraniol 1–5%, α-terpineol |
| Extraction Method | Steam distillation |
| Still / Steam Supply | Controlled steam injection (catalogue range 0.5–1.5 bar) into an SS 316L jacketed still with perforated false bottom |
| Product-contact Material | SS 316L |
| Condensation | Shell-and-tube condenser |
| Oil–Water Separation | Stainless-steel Florentine flask |
| Finishing | Polish filtration; drying over anhydrous sodium sulphate or by vacuum |
| Automation | PLC-based |
| Plant Capacity | Configured to requirement |
| Final Product Form | Coriander essential oil; aromatic hydrosol as co-product |
Plant Capacities
| Plant Scale | Raw Material Throughput | Typical Use |
|---|---|---|
| Pilot | Configured to your feedstock and trial plan | Product development, parameter validation |
| Semi-Commercial | Configured between pilot and commercial scale | Scale-up trials, contract manufacturing |
| Commercial | Configured to raw-material supply and confirmed buyer volume | Commercial production |
Capacity is configured to raw-material supply, confirmed buyer volume and investment timeline; a pilot plant is recommended to validate parameters before scaling.
Manufacturing Process
Raw Material Preparation
Coriander raw material is cleaned, sorted, and (where required) comminuted to the optimal particle size to maximise oil release during distillation.
Charging & Distillation
The prepared Coriander charge is loaded into the SS 316L still and distilled by steam, hydro (hydrodistillation), vacuum, or pressure distillation — selected for the volatility and heat-sensitivity of the target oil.
Condensation
Vapours pass through an efficient multi-tube condenser with chilled-water circulation, condensing the volatile oil and hydrosol.
Oil–Water Separation
Condensate is separated in a stainless-steel Florentine flask; the essential oil is collected while the hydrosol is drawn off (and can be recovered as a co-product).
Polishing & Drying
The crude oil is polish-filtered and dried over anhydrous sodium sulphate (or by vacuum) to remove residual moisture.
Quality Control
Each batch of Coriander oil is verified by GC-MS and physical parameters (specific gravity, refractive index, optical rotation) before release.
Major Plant Equipment
- Raw material cleaning and sorting system
- Size-reduction unit (where required)
- SS 316L jacketed distillation still with perforated false bottom
- Shell-and-tube condenser
- Stainless-steel Florentine flask (oil–water separator)
- Polish filtration system
- Drying unit (anhydrous sodium sulphate or vacuum)
- CIP system
- PLC-based automation and instrumentation
Plant Output
From Plant to Product
Coriander Distillation
This botanical is also in the product range of Sureka Life Sciences, our sister concern in botanical ingredients.
Applications
- Fragrance industry — floral, woody linalool note in soaps, shampoos, cosmetics, and fine perfumery
- Food flavouring — gin botanicals, liqueurs, seasoning blends, and meat products
- Aromatherapy — calming, stress-relief diffusion blends and massage oil formulations
- Beverage industry — flavouring for herbal teas, health drinks, and craft spirits
- Pharmaceutical — flavouring and aromatic component in oral pharmaceutical preparations
Key Features
SS 316L Construction
All product-contact surfaces are SS 316L for corrosion resistance and product purity, with CIP capability between batches.
Efficient Condensation
High-surface-area multi-tube condensers with chilled-water circulation condense the volatile oil and hydrosol.
Distillation Still / Extractor
The still (extractor) is configured for the distillation mode best suited to the feedstock, protecting heat-sensitive aroma compounds.
Hydrosol Recovery
Integrated separation allows the aromatic hydrosol to be recovered as a co-product.
Scalable Capacity
Plants are configured to requirement from pilot scale upward, with modular expansion.
Frequently Asked Questions
Does Mechotech supply the complete machinery for Coriander?
What specification can the Coriander plant achieve?
What production capacities are available for the Coriander plant?
Which industries use the Coriander plant?
Which part of Coriander is processed in the distillation plant?
How is Coriander oil produced in the plant?
What is Coriander oil and what does the catalogue say it contains?
Does Mechotech list other routes or related plants for Coriander?
Which related Mechotech plants are listed with this one?
Ready to discuss your project?
Get a free quote and technical consultation from our engineering team.