Canola Seed Oil (CO₂)
Canola Seed Oil (CO₂)
Extraction Technologies
Mechotech designs and manufactures turnkey extraction plants that process canola seeds to recover canola oil. We supply the machinery for the route selected after screening — raw-material preparation, extraction, separation, concentration or recovery, and drying or collection — configured to the target specification. Mechotech's technology screening identifies one candidate route for this feedstock: Supercritical CO₂ Extraction (SCFE) (high-priority screening, rank 26 of 100 in that technology's screening).
For canola seeds with canola oil as the target, there is one candidate technology: Supercritical CO₂ Extraction (SCFE). By route — Supercritical CO₂ (SCFE): high-priority screening, rank 26 of 100, CO₂; optional ethanol modifier. For the best-ranked route, Supercritical CO₂ (SCFE), the screening flags: nonpolar fraction preferred; polar targets may need modifier and separate validation. These are screening candidates rather than guarantees: the final technology, operating parameters and plant configuration are established during process development and pilot validation. Product-contact parts are built in SS 316L with CIP-cleanable design, and automation is configured to the project.
Technical Specifications
| Product | Canola Seed Oil (CO₂) Extraction Plant |
|---|---|
| Feedstock | Canola seeds |
| Part / Feed Form | Seeds |
| Target Extract | Canola oil |
| Extraction Method | CO2 |
| Technology Count | 1 |
| Product-contact Material | SS 316L, electropolished, CIP-cleanable |
| Automation | PLC-SCADA, configured to requirement |
Plant Capacities
| Plant Scale | Seed Throughput | Typical Use |
|---|---|---|
| Pilot | Configured to your feedstock and trial plan | Product development, parameter validation |
| Semi-Commercial | Configured to raw-material supply and buyer volume | Contract manufacturing, scale-up trials |
| Commercial | Configured to raw-material supply and confirmed buyer volume | Commercial production at confirmed buyer volume |
Capacity is configured to raw-material supply and confirmed buyer volume; we recommend a pilot plant to validate process parameters before scaling. No fixed throughput is quoted for this product.
Manufacturing Process
Each extraction method follows a different process — pick a method to see its steps.
Raw-Material Conditioning
Canola seeds are cleaned and conditioned so canola oil is accessible to supercritical CO₂; moisture and particle size are set during process development.
Extraction Vessel Loading
Conditioned canola seeds are charged into the high-pressure extraction vessel.
Supercritical CO₂ Extraction
Supercritical CO₂ passes through the charge and dissolves canola oil; an ethanol modifier can be evaluated where polar fractions are also required, and operating pressure and temperature are set in process development.
Separator Collection
Pressure is reduced in separator stages so the extracted canola oil drops out of the CO₂ and is collected.
CO₂ Recycle
Gaseous CO₂ is re-liquefied and recirculated to the extractor, limiting make-up gas demand.
Finishing & Packing
The collected canola oil is polished by filtration as needed and packed to the required specification.
Major Plant Equipment
- Raw-material cleaning and size-reduction system
- Supercritical CO₂ extraction vessels
- CO₂ pump, heat exchangers and chiller
- Separator vessels
- CO₂ recovery / recycle system
- Optional ethanol-modifier dosing skid
- Product collection vessels and polish filtration
- CIP (clean-in-place) system
- Storage and finished-product tanks
- PLC-SCADA control panel and instrumentation
Plant Output
Applications
- Pharmaceutical standardised ingredient supply — Canola Seed Oil (CO₂)
- Nutraceutical capsule, tablet, and supplement manufacturing — Canola Seed Oil (CO₂)
- Food and beverage applications — Canola Seed Oil (CO₂)
- Cosmetic and personal care active ingredients — Canola Seed Oil (CO₂)
- Export to regulated-market ingredient buyers — Canola Seed Oil (CO₂)
Key Features
Supercritical CO₂ (SCFE) — High-Priority Screening Fit
Best-ranked route for canola seeds: rank 26 of 100 in Mechotech's supercritical CO₂ extraction screening, using CO₂; optional ethanol modifier. Ranks are directional screening priorities, not measured yield, ROI or plant guarantees.
Canola seeds — Single Candidate Route
Routes screened for canola seeds: Supercritical CO₂ (SCFE) — high-priority, rank 26. The process tab above shows the steps for this route.
Seeds Feed Form
The candidate routes are defined for canola seeds; feedstock assay and moisture are measured as pilot inputs and the feed form is set during process development.
Parameters Fixed After Pilot Trials
Recovery of canola oil, selectivity, solvent or water duty, quality and cleaning are measured in pilot trials, starting with small-scale feed trials, before final plant parameters are fixed.
SS 316L Hygienic Construction
Product-contact surfaces are SS 316L and CIP-cleanable, in a hygienic design suited to food, nutraceutical and pharmaceutical supply chains; PLC-SCADA automation with recipe control can be configured to the project scope.
Frequently Asked Questions
What is a canola seed extraction plant for canola oil?
Which plant part or feed form does the canola seed plant process?
Which extraction technology is suitable for canola seeds?
How does Mechotech's screening rank the candidate route for canola seeds?
How does the canola seed extraction process work?
What equipment does the canola seed extraction plant include?
Why is supercritical CO₂ a candidate technology for canola oil?
What output and specification can the canola seed plant deliver?
What application areas are listed for Canola Seed Oil (CO₂)?
Which related Mechotech extraction pages cover the same material or target?
What capacity is available and is a pilot trial recommended?
Ready to discuss your project?
Get a free quote and technical consultation from our engineering team.