Juniper Leaf
Juniper Leaf
Mechotech designs and manufactures turnkey leaves oils distillation plants for Juniper Leaf. The plant recovers essential oil by distillation for fragrance, aromatherapy, cosmetic, food and pharmaceutical industries. The Sureka Life Sciences (SLS) catalogue lists Juniper Leaf Distillation with Juniperus communis L. as the botanical source and alpha-pinene as the marker compound. Juniper Leaf is a separate page from Juniper (berries) and Cade / Juniper (wood). It is not listed in Mechotech’s product tree or legacy page text, so the exact feed form is confirmed with the client before the plant is configured.
Mechotech’s Juniper Leaf plant is configured around the raw material and the target oil. It is built in SS 316L with integrated condensers and oil–water separation, PLC-based automation and full documentation, and is delivered as a commissioned turnkey system. The distillation mode and operating parameters are established during process development and pilot validation.
Technical Specifications
| Product | Juniper Leaf Essential Oil Distillation Plant |
|---|---|
| Raw Material | Juniper leaves |
| Botanical Name | Juniperus communis L. (per the Sureka Life Sciences catalogue entry for Juniper Leaf Distillation) |
| Plant Part / Feed Form | Leaves, as listed on this page (the SLS catalogue lists the feed under Needles & Twigs; exact feed form confirmed with the client) |
| Marker Compound | Alpha-pinene (per the Sureka Life Sciences catalogue entry) |
| Product Category | Leaves Oils Distillation Plants |
| Extraction Method | Steam, hydro, vacuum or pressure distillation — selected for the volatility and heat-sensitivity of the target oil |
| Product-contact Material | SS 316L |
| Condensation | Multi-tube condenser with chilled-water circulation |
| Oil–Water Separation | Stainless-steel Florentine flask |
| Finishing | Polish filtration; drying over anhydrous sodium sulphate or by vacuum |
| Automation | PLC-based |
| Plant Capacity | Configured to requirement |
| Utility Requirements | Steam, chilled/cooling water, compressed air and power (project-specific) |
| Compliance | GMP hygienic design; full documentation for qualification |
| Final Product Form | Juniper leaf essential oil; aromatic hydrosol as co-product |
Plant Capacities
| Plant Scale | Raw Material Throughput | Typical Use |
|---|---|---|
| Pilot | Configured to your feedstock and trial plan | Product development, parameter validation |
| Semi-Commercial | Configured between pilot and commercial scale | Scale-up trials, contract manufacturing |
| Commercial | Configured to raw-material supply and confirmed buyer volume | Commercial production |
Capacity is configured to raw-material supply, confirmed buyer volume and investment timeline; a pilot plant is recommended to validate parameters before scaling.
Manufacturing Process
Raw Material Preparation
Juniper leaf material is sorted and cleaned of foreign matter and, where required, dried or size-adjusted so that the charge packs evenly in the still.
Charging & Distillation
The prepared Juniper Leaf charge is loaded into the SS 316L still and distilled by steam, hydro, vacuum or pressure distillation, selected during process development for the volatility and heat-sensitivity of the target oil.
Condensation
Vapours pass through a multi-tube condenser with chilled-water circulation, condensing the oil and hydrosol.
Oil–Water Separation
Condensate is separated in a stainless-steel Florentine flask; the oil is collected and the hydrosol is drawn off and can be recovered as a co-product.
Polishing & Drying
The crude oil is polish-filtered and dried over anhydrous sodium sulphate or by vacuum to remove residual moisture.
Quality Control
Each batch is sampled for GC-MS profile and physical parameters — specific gravity, refractive index, optical rotation — against the client’s specification.
Major Plant Equipment
- Leaf and twig cleaning, sorting and drying system
- Perforated basket or false-bottom charge support
- SS 316L distillation still / extractor
- Multi-tube condenser with chilled-water circulation
- Stainless-steel Florentine flask (oil–water separator)
- Polish filtration system
- Drying unit (anhydrous sodium sulphate or vacuum)
- CIP system
- PLC-based automation and instrumentation
Plant Output
Applications
- Aromatherapy applications
- Perfumery and fragrance compositions
- Household fragrance
- Skincare products
Key Features
SS 316L Construction
Product-contact surfaces are SS 316L for corrosion resistance and product purity, with CIP capability between batches.
Efficient Condensation
Multi-tube condensers with chilled-water circulation condense the volatile oil and hydrosol and limit loss of volatile top-notes.
Configurable Distillation Mode
The still is configured for steam, hydro, vacuum or pressure distillation, selected during process development for the volatility and heat-sensitivity of the target oil.
Hydrosol Recovery
Integrated oil–water separation allows the aromatic hydrosol to be drawn off and recovered as a co-product.
Scalable Capacity
Plants are configured to requirement from pilot scale upward, with modular expansion.
Frequently Asked Questions
Does Mechotech supply the complete machinery for Juniper Leaf?
What specification can the Juniper Leaf plant achieve?
What production capacities are available for the Juniper Leaf plant?
Which end uses are listed for the Juniper Leaf plant?
Which part of Juniper Leaf is processed in the distillation plant?
How is Juniper Leaf oil produced in the plant?
What is the botanical source and marker compound of Juniper Leaf on this page?
How does Juniper Leaf differ from the other Juniper pages?
Which other plants does Mechotech list in the leaves-oil distillation range?
Ready to discuss your project?
Get a free quote and technical consultation from our engineering team.