Turmeric — Leaf Oil
Turmeric — Leaf Oil
Mechotech designs and manufactures turnkey leaves oils distillation plants for Turmeric leaves. The product tree lists the entry as Turmeric (Leaves) under Leaves Oils Distillation Plants, and Mechotech’s legacy page for the Turmeric Leaf Oil Distillation Plant describes the oil of the turmeric (Curcuma longa) leaf as distinct from the rhizome oil, dominated on that page by ar-turmerone (50–65%) with α- and β-turmerone, from fresh or dried leaf. The Sureka Life Sciences (SLS) catalogue lists Turmeric Leaves Distillation with Curcuma longa as the botanical source but gives a different composition, led by monoterpenes such as alpha-phellandrene and terpinolene, so the two sources disagree on the marker. This page is the leaf route; the rhizome oil, rhizome extract and CO2 routes are on separate pages. The exact leaf form is confirmed with the client before the plant is configured.
Mechotech’s Turmeric plant is configured around the raw material and the target oil. It is built in SS 316L with integrated condensers and oil–water separation, PLC-based automation and full documentation, and is delivered as a commissioned turnkey system. The distillation mode and operating parameters are established during process development and pilot validation.
Technical Specifications
| Product | Turmeric Essential Oil Distillation Plant |
|---|---|
| Raw Material | Turmeric leaves (Curcuma longa) |
| Botanical Name | Curcuma longa (per Mechotech’s legacy page and the Sureka Life Sciences catalogue entry for Turmeric Leaves Distillation) |
| Plant Part / Feed Form | Leaves, fresh or dried, as the product tree and the legacy page list them (the exact form is confirmed with the client) |
| Marker Compound | Not settled: the legacy page names ar-turmerone, α-turmerone and β-turmerone, while the Sureka Life Sciences entry lists alpha-phellandrene, terpinolene, beta-sesquiphellandrene, 1,8-cineole and p-cymene; the marker is confirmed with the client |
| Product Category | Leaves Oils Distillation Plants |
| Extraction Method | Steam, hydro, vacuum or pressure distillation — selected for the volatility and heat-sensitivity of the target oil |
| Product-contact Material | SS 316L |
| Condensation | Multi-tube condenser with chilled-water circulation |
| Oil–Water Separation | Stainless-steel Florentine flask |
| Finishing | Polish filtration; drying over anhydrous sodium sulphate or by vacuum |
| Automation | PLC-based |
| Plant Capacity | Configured to requirement |
| Utility Requirements | Steam, chilled/cooling water, compressed air and power (project-specific) |
| Compliance | GMP hygienic design; full documentation for qualification |
| Final Product Form | Turmeric essential oil; aromatic hydrosol as co-product |
Plant Capacities
| Plant Scale | Raw Material Throughput | Typical Use |
|---|---|---|
| Pilot | Configured to your feedstock and trial plan | Product development, parameter validation |
| Semi-Commercial | Configured between pilot and commercial scale | Scale-up trials, contract manufacturing |
| Commercial | Configured to raw-material supply and confirmed buyer volume | Commercial production |
Capacity is configured to raw-material supply, confirmed buyer volume and investment timeline; a pilot plant is recommended to validate parameters before scaling.
Manufacturing Process
Raw Material Preparation
Turmeric leaves are cleaned and sorted, and size-reduced where required, so that the charge packs evenly in the still and steam can reach the leaf tissue; whether the leaf is fresh or dried, and the particle size, are set during process development.
Charging & Distillation
The prepared Turmeric charge is loaded into the SS 316L still and distilled by steam, hydro, vacuum or pressure distillation, selected during process development for the volatility and heat-sensitivity of the target oil.
Condensation
Vapours pass through a multi-tube condenser with chilled-water circulation, condensing the oil and hydrosol.
Oil–Water Separation
Condensate is separated in a stainless-steel Florentine flask; the oil is collected and the hydrosol is drawn off and can be recovered as a co-product.
Polishing & Drying
The crude oil is polish-filtered and dried over anhydrous sodium sulphate or by vacuum to remove residual moisture.
Quality Control
Each batch is sampled for GC-MS profile and physical parameters — specific gravity, refractive index, optical rotation — against the client’s specification.
Major Plant Equipment
- Leaf cleaning and size-reduction system
- Perforated basket or false-bottom charge support
- SS 316L distillation still / extractor
- Multi-tube condenser with chilled-water circulation
- Stainless-steel Florentine flask (oil–water separator)
- Polish filtration system
- Drying unit (anhydrous sodium sulphate or vacuum)
- CIP system
- PLC-based automation and instrumentation
Plant Output
Applications
- Skin-care and cosmetic products
- Aromatherapy and perfumery
- Active packaging and preservation (catalogue use area)
- Pharmaceutical and food uses (per Mechotech’s Turmeric (Leaves) Oil Distillation Plant legacy page)
Key Features
SS 316L Construction
Product-contact surfaces are SS 316L for corrosion resistance and product purity, with CIP capability between batches.
Efficient Condensation
Multi-tube condensers with chilled-water circulation condense the volatile oil and hydrosol and limit loss of volatile top-notes.
Configurable Distillation Mode
The still is configured for steam, hydro, vacuum or pressure distillation, selected during process development for the herb charge and the target oil.
Hydrosol Recovery
Integrated oil–water separation allows the aromatic hydrosol to be drawn off and recovered as a co-product.
Scalable Capacity
Plants are configured to requirement from pilot scale upward, with modular expansion.
Frequently Asked Questions
Does Mechotech supply the complete machinery for Turmeric?
What specification can the Turmeric plant achieve?
What production capacities are available for the Turmeric plant?
Which end uses are listed for the Turmeric plant?
Which part of turmeric is processed on this page?
How is Turmeric leaf oil produced in the plant?
What does the oil contain, and why is no percentage stated?
Why is the catalogue CAS number not used here?
How does this page differ from the other turmeric pages?
Which neighbouring plants does the product tree list with Turmeric (Leaves)?
Ready to discuss your project?
Get a free quote and technical consultation from our engineering team.