Ganuga seed
Ganuga seed
Purity Levels
Karanginin 90%
Mechotech designs and manufactures turnkey herbal extraction plants for Ganuga seed, listed in the catalogue with a Karanginin 90% standardisation. The legacy catalogue describes Ganuga seed as valued in traditional medicine for its anti-inflammatory and antimicrobial properties, with pharmaceutical and Ayurvedic applications. The botanical identification is confirmed with the client before the plant is configured.
Mechotech’s Ganuga Seed plant is configured around the specific chemistry and processing requirements of the raw material. Built in SS 316L with integrated solvent recovery, automation and full documentation, each plant is delivered as a commissioned turnkey system. The figure Karanginin 90% is the catalogue standardisation; the specification actually targeted is set during process development and pilot validation.
Technical Specifications
| Product | Ganuga Seed Extraction Plant |
|---|---|
| Process Category | Herbal Extraction Plants |
| Botanical Name | Pongamia pinnata (L.) Pierre, per the Sureka Life Sciences catalogue entry; a legacy Mechotech text names Cleome viscosa — identification confirmed against the client's material (MANUAL REVIEW) |
| Raw Material | Ganuga seed |
| Plant Part / Feed Form | Seeds (exact feed form confirmed with the client) |
| Principal Documented Constituent | Karanginin (catalogue-listed standardisation marker) |
| Standardisation | Karanginin 90% (catalogue figure) |
| Extract Type | Standardised extract (liquid concentrate or dried powder, per specification) |
| Extraction Method | Food-grade solvent (alcohol / aqueous) extraction in closed, jacketed SS 316L extractors |
| Product-contact Material | SS 316L, electropolished, CIP-cleanable |
| Filtration System | Plate-and-frame filter press with cartridge polish filtration |
| Concentration System | Falling-film / vacuum evaporator with closed-loop solvent recovery |
| Drying System | Spray dryer or vacuum dryer, where a powder is required |
| Utility Requirements | Steam, chilled/cooling water, vacuum, compressed air, soft water, power (project-specific) |
| Automation | PLC-based automation |
| Plant Capacity | Configured to requirement |
| Compliance | GMP hygienic design; full documentation for qualification |
| Final Product Form | Standardised extract (concentrate or free-flowing powder) |
Plant Capacities
| Plant Scale | Raw Material Throughput | Typical Use |
|---|---|---|
| Pilot | Configured to your feedstock and trial plan | Product development, parameter validation |
| Semi-Commercial | Configured between pilot and commercial scale | Scale-up trials, contract manufacturing |
| Commercial | Configured to raw-material supply and confirmed buyer volume | Commercial production |
Capacity is configured to raw-material supply, confirmed buyer volume and investment timeline; a pilot plant is recommended to validate parameters before scaling.
Manufacturing Process
Raw Material Preparation
Ganuga seed is authenticated, tested for moisture and milled to a uniform particle size to maximise solvent contact before extraction.
Extraction
The milled Ganuga Seed raw material is extracted with food-grade solvent (alcohol / aqueous) in closed jacketed SS 316L extractors under controlled temperature and over multiple cycles to recover the target actives.
Filtration
The extract (miscella) is clarified through a plate-and-frame filter press followed by cartridge polish filters.
Concentration & Solvent Recovery
The miscella is concentrated in a falling-film / vacuum evaporator, with solvent recovered through the condenser return system.
Standardisation
The concentrate is assayed and adjusted to the declared catalogue specification, before the final finishing step.
Drying & Quality Control
The standardised Ganuga Seed extract is concentrated or spray- or vacuum-dried to the required form, then released after assay, residual-solvent, heavy-metal, microbial and moisture testing.
Major Plant Equipment
- Raw material authentication, cleaning and moisture testing
- Mill (size reduction)
- Jacketed SS 316L extraction vessels
- Plate-and-frame filter press
- Cartridge polish filters
- Falling-film / vacuum evaporator
- Closed-loop solvent recovery system (condenser return)
- Spray dryer / vacuum dryer
- CIP (clean-in-place) system
- PLC-based automation panel
Plant Output
From Plant to Product
Ganuga seed Extract
This botanical is also in the product range of Sureka Life Sciences, our sister concern in botanical ingredients.
Applications
- Pharmaceutical standardised herbal extracts and phytomedicines
- Nutraceutical capsule and tablet formulations
- Ayurvedic and traditional medicine preparations
- Cosmetic and personal care active ingredient supply
- Functional food and dietary supplement manufacturing
Key Features
SS 316L Construction
Electropolished SS 316L product-contact surfaces with CIP operation between batches.
Closed-Loop Solvent Recovery
Integrated condenser-return recovery reuses solvent between batches and reduces solvent loss.
Standardised to Specification
In-process and batch-release assay are used to check the finished extract against its declared target specification (catalogue figure: Karanginin 90%).
Flexible Finishing
The extract can be finished as a concentrate or, with a matched spray or vacuum dryer, as a free-flowing powder.
Scalable Batch Capacity
Plants are configured to requirement from pilot scale upward, with modular expansion.
Frequently Asked Questions
Does Mechotech supply the complete machinery for Ganuga Seed?
What specification can the Ganuga Seed plant achieve?
What production capacities are available for the Ganuga Seed plant?
Which industries does the catalogue list for the Ganuga Seed plant?
Which part of Ganuga Seed is processed in the plant?
How is Ganuga Seed extract produced in Mechotech’s extraction plant?
What is Ganuga seed and what is its botanical source?
Which related plants does the catalogue list with Ganuga Seed?
Ready to discuss your project?
Get a free quote and technical consultation from our engineering team.