Herbal Extraction Plants

Terminalia Bellirica

Purity Levels

Tannins 40%

Mechotech designs and manufactures turnkey herbal extraction plants for Terminalia Bellirica, listed in the catalogue with a 40% tannin figure. Mechotech’s legacy page for the Terminalia Bellirica Extract Plant describes extracting active compounds from the fruit of Terminalia bellirica, known as Baheda, a key component of the Ayurvedic formulation Triphala, rich in tannins, gallic acid, ellagic acid and antioxidants. Mechotech lists this plant under three entries with overlapping figures: this page (tannins 40%), Beheda (40% tannins) and Terminalia Bellirica Extract (40% polyphenols as gallic acid by UV); the sources do not show how they differ, so they are cross-linked below and not merged. The Sureka Life Sciences catalogue has no matching entry.

Mechotech’s Terminalia Bellirica plant is configured around the specific chemistry and processing requirements of the raw material. Built in SS 316L with integrated solvent recovery, automation and full documentation, each plant is delivered as a commissioned turnkey system. The figure 40% tannins is the catalogue standardisation; the specification actually targeted, the assay method and the feed form are set during process development and pilot validation.

Technical Specifications

Product	Terminalia Bellirica Extraction Plant
Process Category	Herbal Extraction Plants
Botanical Name	Terminalia bellirica (per Mechotech’s legacy page and the sibling Terminalia Bellirica Extract page)
Raw Material	Terminalia bellirica fruit (Baheda, Bibhitaki)
Plant Part / Feed Form	Fruit, as the legacy page describes it; the sibling Terminalia Bellirica Extract page lists dried, de-seeded fruit pericarp. The exact feed form is confirmed with the client
Principal Documented Constituent	Tannins (as listed in the catalogue); the legacy page also names gallic acid and ellagic acid; no individual compound and no assay method stated for this entry
Standardisation	Tannins 40% (catalogue figure; no assay method stated for this entry)
Extract Type	Standardised extract (liquid concentrate or dried powder, per specification)
Extraction Method	Food-grade solvent (alcohol / aqueous) extraction in closed, jacketed SS 316L extractors
Product-contact Material	SS 316L
Filtration	Plate-and-frame filter press with cartridge polish filters
Concentration	Falling-film / vacuum evaporator with solvent recovery
Drying / Finishing	Kept as a concentrate, or spray- or vacuum-dried to a powder, per specification
Automation	PLC-based
Plant Capacity	Configured to requirement
Utility Requirements	Steam, chilled/cooling water, compressed air and power (project-specific)
Compliance	GMP hygienic design; full documentation for qualification
Final Product Form	Terminalia bellirica extract — Tannins 40% (catalogue figure)

Plant Capacities

Plant Scale	Raw Material Throughput	Typical Use
Pilot	Configured to your feedstock and trial plan	Product development, parameter validation
Semi-Commercial	Configured between pilot and commercial scale	Scale-up trials, contract manufacturing
Commercial	Configured to raw-material supply and confirmed buyer volume	Commercial production

Capacity is configured to raw-material supply, confirmed buyer volume and investment timeline; a pilot plant is recommended to validate parameters before scaling.

Manufacturing Process

Raw Material Preparation

Terminalia bellirica fruit is authenticated, cleaned, tested for moisture and milled to a uniform particle size to maximise solvent contact before extraction. Whether the fruit is de-seeded, and the pericarp or whole fruit is used, is confirmed with the client.

Extraction

The prepared Terminalia Bellirica raw material is extracted with food-grade solvent (alcohol / aqueous) in closed jacketed SS 316L extractors under controlled temperature and over multiple cycles to recover the target constituents. The solvent ratio and conditions are set during process development.

Filtration

The extract (miscella) is clarified through a plate-and-frame filter press followed by cartridge polish filters.

Concentration & Solvent Recovery

The miscella is concentrated in a falling-film / vacuum evaporator, with solvent recovered through the condenser return system.

Standardisation

The concentrate is assayed and adjusted to the client’s target specification (catalogue figure: tannins 40%) before the final finishing step. The assay method is agreed with the buyer.

Finishing & Quality Control

The standardised Terminalia Bellirica extract is kept as a concentrate or spray- or vacuum-dried to the required form, then released after assay, residual-solvent, heavy-metal, microbial and moisture testing.

Major Plant Equipment

Raw material authentication, cleaning and moisture testing
Mill (size reduction)
Jacketed SS 316L extraction vessels
Solvent storage tanks
Plate-and-frame filter press
Cartridge polish filters
Falling-film / vacuum evaporator
Closed-loop solvent recovery system (condenser return)
Standardisation / blending vessel
Spray dryer / vacuum dryer (where a powder is required)
CIP (clean-in-place) system
PLC-based automation panel

Plant Output

Terminalia bellirica extract — catalogue figure tannins 40%

Applications

Pharmaceutical, nutraceutical and Ayurvedic ingredient supply (per Mechotech’s legacy Beheda page)
Cosmetic and personal-care ingredient supply (per Mechotech’s legacy Beheda page)
Triphala formulations (per the legacy page)

Key Features

SS 316L Construction
Electropolished SS 316L product-contact surfaces with CIP operation between batches.
Alcohol / Aqueous Solvent Extraction
Closed jacketed extractors run food-grade alcohol or aqueous solvent over multiple cycles to recover the target fraction.
Closed-Loop Solvent Recovery
Integrated condenser-return recovery reuses solvent between batches and reduces solvent loss.
Standardised to Specification
In-process and batch-release assay are used to check the finished extract against the agreed target specification.
Scalable Batch Capacity
Plants are configured to requirement from pilot scale upward, with modular expansion.

Frequently Asked Questions

Does Mechotech supply the complete machinery for Terminalia Bellirica?

Yes. Mechotech supplies the complete turnkey plant for Terminalia Bellirica — engineered, fabricated at our Hyderabad facility, installed and commissioned as a single integrated system. Final process parameters are established during process development and pilot validation.

What specification can the Terminalia Bellirica plant achieve?

The plant is configured to the client’s target specification for Terminalia Bellirica; the specification achieved is established during process development and pilot validation, and batch-release testing with certificate-of-analysis documentation is defined with the client.

What production capacities are available for the Terminalia Bellirica plant?

Capacity for the Terminalia Bellirica plant is configured to raw-material supply, confirmed buyer volume and investment timeline, starting at pilot scale; a pilot plant is recommended to validate parameters before scaling.

Which industries use the Terminalia Bellirica plant?

The end-use areas listed for Terminalia Bellirica are given under Applications. The end use and the target specification are confirmed with the client before the plant is configured.

How is Terminalia Bellirica extract produced in Mechotech’s extraction plant?

Raw material is authenticated, cleaned, moisture-tested and milled, then extracted with food-grade solvent (alcohol / aqueous) in closed jacketed SS 316L extractors over multiple cycles. The extract is clarified through a plate-and-frame filter press and cartridge polish filters, concentrated in a falling-film / vacuum evaporator with solvent recovery, adjusted against the target specification and finished as a concentrate or powder; each batch is released after assay and quality testing.

Which part of Terminalia bellirica is used?

Mechotech’s legacy page describes the fruit of Terminalia bellirica, known as Baheda or Bibhitaki. The sibling Terminalia Bellirica Extract page lists dried, de-seeded fruit pericarp. The exact feed form is confirmed with the client before the plant is configured.

How does this page differ from Beheda and Terminalia Bellirica Extract?

All three describe Terminalia bellirica fruit. Beheda is listed at 40% tannins, the same figure as this page, and Terminalia Bellirica Extract is listed at 40% polyphenols as gallic acid by UV. The product tree lists them as separate entries and the sources do not show how they differ, so Mechotech has flagged the overlap rather than merging them; the figure and the assay the client wants are confirmed before choosing a page.

Why did the legacy page for this entry carry a different title?

The legacy page that matches this entry is titled Terminalia Chebula Extract Plant but its text describes Terminalia bellirica and Baheda. Mechotech’s earlier page graphic for this entry also showed Terminalia chebula (Haritaki). The legacy title looks like a labelling error, so this page follows the text and the product-tree name, and the separate Terminalia Chebula Extract page covers Haritaki.

How does Terminalia bellirica relate to Triphala?

Mechotech’s legacy pages name Terminalia bellirica as a key component of the Ayurvedic formulation Triphala, and the Triphala legacy page lists its three fruits as amla, Terminalia bellirica and Terminalia chebula. The combined product is on the Triphala Extract page, and the single-fruit pages are Amla Extract and Terminalia Chebula Extract.

Which equipment finishes the Terminalia Bellirica extract?

After solvent extraction, the miscella is clarified on a Filter Press, concentrated in a Falling Film Evaporator with solvent recovery, and then kept as a concentrate or dried in a Spray Dryer or vacuum dryer when a powder is required. The finishing form is agreed with the client.

Which related routes and pages does Mechotech list alongside Terminalia Bellirica?

The solvent options used on this page are described on Hydro Alcoholic-Based Extraction and Alcohol-Based Extraction. The hub page is Herbal Extraction Plants, which lists the other herbal extraction plants in the catalogue. In the product tree, Terminalia Bellirica sits next to Terminalia Chebula Extract and Tetra Hydro Curcumin; they are different raw materials, each with its own catalogue figure and plant part.

Ready to discuss your project?

Get a free quote and technical consultation from our engineering team.

Get A Free Quote

Terminalia Bellirica