Jatamansi
Jatamansi
Purity Levels
30% Saponins
Mechotech designs and manufactures turnkey herbal extraction plants for Jatamansi (Nardostachys jatamansi DC), listed in the catalogue with a 30% saponins figure. This page covers the solvent-extracted herbal extract; Mechotech lists the roots / husk distillation plants for jatamansi essential oil as separate pages.
Mechotech’s Jatamansi herbal extract plant is configured around the specific chemistry and processing requirements of the raw material. Built in SS 316L with integrated solvent recovery, automation and full documentation, each plant is delivered as a commissioned turnkey system. The figure 30% Saponins is the catalogue standardisation; the specification actually targeted is set during process development and pilot validation.
Technical Specifications
| Product | Jatamansi Extraction Plant |
|---|---|
| Process Category | Herbal Extraction Plants |
| Botanical Name | Nardostachys jatamansi DC |
| Raw Material | Jatamansi (Nardostachys jatamansi DC), herbal extract route |
| Plant Part / Feed Form | Rhizomes (as named on Mechotech’s earlier Jatamansi herbal extraction page; exact feed form confirmed with the client) |
| Principal Documented Constituent | Saponins (as listed in the catalogue) |
| Standardisation | 30% Saponins (catalogue figure) |
| Extract Type | Standardised extract (liquid concentrate or dried powder, per specification) |
| Extraction Method | Food-grade solvent (alcohol / aqueous) extraction in closed, jacketed SS 316L extractors |
| Product-contact Material | SS 316L, electropolished, CIP-cleanable |
| Filtration System | Plate-and-frame filter press with cartridge polish filtration |
| Concentration System | Falling-film / vacuum evaporator with closed-loop solvent recovery |
| Drying System | Spray dryer or vacuum dryer, where a powder is required |
| Utility Requirements | Steam, chilled/cooling water, vacuum, compressed air, soft water, power (project-specific) |
| Automation | PLC-based automation |
| Plant Capacity | Configured to requirement |
| Compliance | GMP hygienic design; full documentation for qualification |
| Final Product Form | Standardised extract (concentrate or free-flowing powder) |
Plant Capacities
| Plant Scale | Raw Material Throughput | Typical Use |
|---|---|---|
| Pilot | Configured to your feedstock and trial plan | Product development, parameter validation |
| Semi-Commercial | Configured between pilot and commercial scale | Scale-up trials, contract manufacturing |
| Commercial | Configured to raw-material supply and confirmed buyer volume | Commercial production |
Capacity is configured to raw-material supply, confirmed buyer volume and investment timeline; a pilot plant is recommended to validate parameters before scaling.
Manufacturing Process
Raw Material Preparation
Jatamansi (Nardostachys jatamansi) raw material is authenticated, cleaned, tested for moisture and milled to a uniform particle size to maximise solvent contact before extraction. The rhizome feed form is confirmed with the client.
Extraction
The prepared Jatamansi raw material is extracted with food-grade solvent (alcohol / aqueous) in closed jacketed SS 316L extractors under controlled temperature and over multiple cycles to recover the target constituents.
Filtration
The extract (miscella) is clarified through a plate-and-frame filter press followed by cartridge polish filters.
Concentration & Solvent Recovery
The miscella is concentrated in a falling-film / vacuum evaporator, with solvent recovered through the condenser return system.
Standardisation
The concentrate is assayed and adjusted to the client’s target specification (catalogue figure: 30% Saponins) before the final finishing step.
Drying & Quality Control
The standardised Jatamansi extract is kept as a concentrate or spray- or vacuum-dried to the required form, then released after assay, residual-solvent, heavy-metal, microbial and moisture testing.
Major Plant Equipment
- Raw material authentication, cleaning and moisture testing
- Mill (size reduction)
- Jacketed SS 316L extraction vessels
- Plate-and-frame filter press
- Cartridge polish filters
- Falling-film / vacuum evaporator
- Closed-loop solvent recovery system (condenser return)
- Spray dryer / vacuum dryer
- CIP (clean-in-place) system
- PLC-based automation panel
Plant Output
From Plant to Product
Jatamansi Extract
This botanical is also in the product range of Sureka Life Sciences, our sister concern in botanical ingredients.
Applications
- Pharmaceutical standardised ingredient supply
- Nutraceutical capsule, tablet, and supplement manufacturing
- Food, flavour, and beverage applications
- Cosmetic and personal care active ingredients
- Ayurvedic and traditional medicine preparations
Key Features
SS 316L Construction
Electropolished SS 316L product-contact surfaces with CIP operation between batches.
Closed-Loop Solvent Recovery
Integrated condenser-return recovery reuses solvent between batches and reduces solvent loss.
Standardised to Specification
In-process and batch-release assay are used to check the finished extract against its agreed target specification (catalogue figure: 30% Saponins).
Flexible Finishing
The extract can be finished as a concentrate or, with a matched spray or vacuum dryer, as a free-flowing powder.
Scalable Batch Capacity
Plants are configured to requirement from pilot scale upward, with modular expansion.
Frequently Asked Questions
Does Mechotech supply the complete machinery for Jatamansi?
What specification does the catalogue list for Jatamansi?
What production capacities are available for the Jatamansi plant?
How is Jatamansi extract produced in Mechotech’s extraction plant?
How does this Jatamansi extract page differ from Mechotech’s jatamansi distillation pages?
Which plant part of Jatamansi is processed in the extract plant?
Which botanical and marker does the catalogue list for Jatamansi Extract?
Which equipment finishes the Jatamansi extract as a concentrate or powder?
Which related routes and pages does Mechotech list alongside Jatamansi?
Ready to discuss your project?
Get a free quote and technical consultation from our engineering team.